MUSIC CITY WORCESTER

RUN BY MUSICIANS FOR MUSICIANS


PEAVEY VYPYR 15 MULTIEFFECT AMP £89

Peavey Vypyr 30 Guitar Amplifier
Peavey Vypyr 30





Peavey
Peavey Vypyr 30 Guitar Amplifier


Peavey Vypyr 30 Guitar Amplifier





Specification
  • 30 watts
  • 4 channels with 3-band EQ, master volume and pre- and post-gain controls
  • 12'' (305mm) custom-voiced modeling speaker
  • 11 editable rack effects
  • 11 editable stomp-box effects
  • Up to 5 effects SIMULTANEOUSLY
  • On-board looper
  • On-board chromatic tuner
  • Up to 400 presets with optional Sanpera II footswitch
  • MIDI In/Out
  • Tap Tempo button
  • Studio-quality headphone output
  • Patented TransTube® technology in preamp and power amp
  • £165

NEW LANEY CUB 10


Laney Cub 10, 5 Watts, New

picture of Laney Cub 10, 5 Watts, New, Valve, Amps product details : Guitar Village UK

£179.00 + delivery 

Frankfurt 09 sees the launch of the CUB range of petite tube amps

Some say beautiful things come in small packages, well if they are talking about the new CUB range of amplifiers from Laney, then theyre correct! 

The CUB range offers the player a very traditional looking and sounding small amp package, born out of Laneys 40 plus years heritage of building tube amps. 

The CUB 8 and CUB 10 are straightforward tone machines. The single ended CLASS A CUB 8 features an 8" Celestion driver and produces 5 watts RMS of classic tube tone from a single 6V6GT equipped power section. 

Its straight-ahead pre amp consists of Tone & Volume and is loaded with a single ECC83 pre amp tube. The CUB 8 houses an extension speaker socket on the rear panel so it can be used to drive a larger speaker should you want to. 

Bigger, but still a beauty! 

The Class A/B CUB 10 is the bigger sibling of the CUB 8 and features a 10" Celestion driver and a pair of 6V6GTs in the output section. The ECC83 equipped pre amp houses Tone and Volume like the CUB 8 but with the addition of an extra Gain control. Capable of producing a wide range of tube tone the CUB 10 houses an extension speaker socket on the rear panel.
Colour: 5 Watts
New/2nd hand: New

Peavey Valveking

Peavey - Valve King 112 - Combo

Peavey - Valve King 112 - Combo





Details:

Peavey ValveKing® amps feature a patented, variable Class A-A/B control called Texture™, which allows sweepable selection between Class A and Class A/B power structures, as well as any combination of the two. With this feature, guitarists can coax virtually any tone from this tweaked-out amplifier. The amp's preamp and power sections use 12AX7 and 6L6GC tubes, respectively, and drive specially voiced 12" ValveKing® loudspeakers (112 and 212 versions only). Additional standard features include two footswitchable channels with independent, three-band EQ and volume, plus a footswitchable gain/volume boost on the lead channel to provide extra volume for solos. ValveKing® amps also feature global resonance, presence and reverb controls, a buffered effects loop and dual speaker jacks in parallel (head and 212 only).

Features

* 50 watts (rms) into 16 ohms
* Two 6L6GC and three 12AX7 tubes
* Two independent footswitchable channels
* Separate EQ for each channel
* Footswitchable gain/volume boost on lead channel
* External speaker capability
* 12 inch ValveKing® speaker
* Reverb with level control
* Buffered effects loop
* Resonance switch for "tight or loose" cabinet response
* Patented Texture™ variable Class A simulation control
* Footswitch not included

NEW VYPYR 100

Peavey Vypyr 100 100W Guitar Amplifier


 

   £375


 
      
 

Peavey Vypyr 100 100W Guitar AmplifierEnlarge the picture

Product details for Peavey Vypyr 100 100W Guitar Amplifier

 

Description of the Peavey Vypyr 100 Guitar Amp

With double the processing power, models and effects of competitive modeling amplifiers, the VYPYR Series dramatically redefines the power and scope of modern guitar amplification. VYPYR amplifiers are based on a combination of powerful 32-bit, floating-point SHARC processors and patented TransTube analog circuitry.

The Vypyr 100 features 24 amp channel models -- both the clean and distorted channels of 12 popular amps for the first time anywhere -- plus 11 editable preamp "stomp box" effects and 11 editable post-amp "rack" effects with dual-parameter control. Players can use up to five effects simultaneously. When used with the optional Peavey Sanpera foot controller, the possibilities further expand from 12 in-amp presets to 400 programmable presets, with an on-board looper and more.
The Peavey Vypyr 100 acts as its own computer audio interface, with a built-in studio-quality USB 2.0 output that is recognized by computers as an audio device.
The Peavey Vypyr 100 also features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface.

Key Features of the Peavey Vypyr 100 Guitar Amp

  • 100 watts (rms)
  • Two 12" custom voiced modeling speakers
  • Four channels
  • WYSIWYG (What You See Is What You Get) technology
  • True analog distortion
  • 24 Amp channel models
  • 11 Editable pre-amplifier "Stompbox" effects
  • 11 Editable "Rack" effects
  • 12 On-board programmable presets
  • Up to 400 presets with optional Sanpera II footswitch
  • Dual parameter FX control
  • Up to five FX simultaneously
  • 32 bit floating point Sharc processor
  • Patented TransTube technology
  • Power Sponge output power attenuator
  • On-board Looper with optional Sanpera footswitch
  • Chromatic tuner
  • MIDI In/Out
  • Studio quality USB interface
  • MP3/CD/Aux input

NEW PEAVEY AMPS NOW IN

Audition Peavey picture
Zoom in Zoom in

£ 32Inc. VAT


Ask us a question Ask us a question

Peavey Audition

The basic building blocks of the TransTube sound are the exclusive designs of the preamp and power amp. The preamp section tailors gain to meet the need for any amount of drive, from crystal clear to thick, smooth sustain. The power amp reacts just like a tube output section by responding to the preamp with natural compression that increases as the amp gets louder. With TransTube, you get a killer amp with widely ranging dynamics and natural "grit," just like a tube amp!

Features

7 watts(rms) into 8 ohms
4" heavey-duty speaker
TransTube® tube emulation circuitry
Master Volume control
Clean & Lead channel switch
2-band passive EQ
Headphone jack

Solid State Amplifiers
GA10

A great little amp for beginners, the GA10 delivers 10 watts RMS output – which is plenty if you’re just starting out and you don’t need the neighbours to hear. Turn up the gain controls for a dirty, distorted sound, or plug in your headphones for a private practice session.

- 10 Watts RMS
- Power Force 6.5" Speaker
- Gain & Volume Controls
- 3 Band EQ (Bass, Middle, Treble)
- Headphone output


back to category

Acoustic Amplifiers
AEA60

Designed with live playing in mind, the AEA60 features
60W of power, line out so you can run straight into a PA
system and L/R speakers for stereo sound dispersion.

- 2 x 30 Watts RMS
- 2 x 10” Co-axial Speaker

Channel 1:
- Combo Input (XLR/¼” Jack)
- Level, Reverb (switchable)

Channel 2:
- Level, Bass, Mid, Mid Freq, Treble
- Chorus (footswitchable)
- Reverb (footswitchable)
- Optional Footswitch FSW200

Global:
- CD Input
- 5 Band Graphic EQ
- Master Level
- Left and Right Speaker Output
- Effects Loop
- Line Out


back to category